SECURITY CABLE / ALARM CABLE

KUWES ALARM CABLES ARE MANUFACTURED IN ACCORDANCE WITH IEC STANDARDS. THESE CABLES ARE USED FOR INSTALLATION IN SIGNALING AND ALARM SYSTEM. THIS IS SUITABLE FOR THE CONNECTION OF CONTACTS, DETECTORS AND SENSORS, INFRA-RED AS WELL AS MICROWAVE ORMIXED TECHNOLOGY SYSTEMS TO THE SWITCHBOARD. THE WIDE PRODUCTION RANGE CONFORM TO EVERY REGULATION FOR THE INSTALLATION OF ALL APPLICATION.

1)CONDUCTOR:	BARE COPPER STRANDED OR SOLID CONDUCTOR FLEXIBLE SECTION IN 0.22MMSQ
2)INSULATION:	PVC FLAME RETARDANT MEET THE REQUIREMENT OF IEC,CEI,VDE AND NFC STANDARDS
3)DRAIN WIRE:	IN STRANDED OR SOLID BARE COPPER
4)SHIELDING:	ALUMINUM/POLYESTER FOIL COVERAGE 100%
5)OUTER JACKET:	PVC FLAME RETARDANT MEET THE REQUIREMENT OF IEC,CEI,VDE AND NFC STANDARDS
OPTION:LSZH SHEATH, POLYETHYLENE SHEATH, OTHER SHEATH COLOR AVAILABLE

TYPE	CORE(MM)	INSULATION(MM)	300 / 300V	OUTER JACKET(MM) 450/750V	0.6 / 1KV
2 X 0.22 4 X 0.22 6 X 0.22 8 X 0.22 10 X 0.22 12 X 0.22	7 X0.20 7 X0.20 7 X0.20 7 X0.20 7 X0.20 7 X0.20	0.23 0.23 0.23 0.23 0.23 0.23	3.30 3.50 4.20 4.60 5.20 5.40	3.60 4.20 5.00 5.50 6.00 6.60	3.80 5.00 5.50 6.00 6.50 7.20
2 X 0.22 + 2 X 0.50 4 X 0.22 + 2 X 0.50 6 X 0.22 + 2 X 0.50 8 X 0.22 + 2 X 0.50 10 X 0.22 + 2 X 0.50 12 X 0.22 + 2 X 0.50 14 X 0.22 + 2 X 0.50 16 X 0.22 + 2 X 0.50 20 X 0.22 + 2 X 0.50	7 X0.20 7 X0.20 7 X0.20 7 X0.20 7 X0.20 7 X0.20 7 X0.20 7 X0.20 7 X0.20	0.30 / 0.23 0.30 / 0.23 0.30 / 0.23 0.30 / 0.23 0.30 / 0.23 0.30 / 0.23 0.30 / 0.23 0.30 / 0.23 0.30 / 0.23	4.10 4.00 4.00 5.20 5.40 5.80 5.90 6.30 7.10	5.00 5.50 5.80 6.20 6.60 7.00 7.50 8.10 8.50	5.50 6.00 6.50 7.00 7.60 8.00 8.40 9.00 9.80
2 X 0.22 + 2 X 0.75 4 X 0.22 + 2 X 0.75 6 X 0.22 + 2 X 0.75 8 X 0.22 + 2 X 0.75 10 X 0.22 + 2 X 0.75 12 X 0.22 + 2 X 0.75 14 X 0.22 + 2 X 0.75 16 X 0.22 + 2 X 0.75 20 X 0.22 + 2 X 0.75	7 X0.20 7 X0.20 7 X0.20 7 X0.20 7 X0.20 7 X0.20 7 X0.20 7 X0.20 7 X0.20	0.35 / 0.23 0.35 / 0.23 0.35 / 0.23 0.35 / 0.23 0.35 / 0.23 0.35 / 0.23 0.35 / 0.23 0.35 / 0.23 0.35 / 0.23	4.80 5.00 5.40 5.80 6.20 6.40 6.60 6.90 7.80	5.50 5.80 6.00 6.50 6.8 7 7.3 7.7 8.6	6.00 6.70 7.10 7.30 8.1 8.5 8.9 9.5 10.6

JUMPER WIRE

KUWES JUMPER WIRE ARE MANUFACTURED IN ACCORDANCE WITH BT SPEC CW1423 STANDARDS. THESE CABLES ARE USED FOR JUMPERING OR HOOK UP ON DISTRIBUTION FRAMES AND IS ALSO AS A GENERAL EQUIPMENT WIRE IN CABINETS AND EXCHANGE EQUIPMENT.

CABLE CONSTRUCTION:

1. CONDUCTOR: BARE COPPER SOLID CONDUCTOR, 0.50 MM NOMINAL DIAMETER
   
2. INSULATION: PVC INSULATION WITH NOMINAL 1.08MM

ELECTRICAL CHARACTERISTICS

1. CONDUCTOR RESISTANCE:(NOM.) 98.00 /KM
   
2. INSULATION RESISTANCE:INSULATION RESISTANCE MEASUREMENTS SHALL BE MADE WITH NOT LESS THAN 500V D.C. AFTER STEADY ELECTRFICATION FOR ONE MINUTE THE INSULATION RESISTANCE MEASURED BETWEEN EACH CONDUCTOR AND THE REMAINING CONDUCTORS CONNECTED TOGETHER SHALL BE NOT LESS THAN 50MW WHEN MEASURED OVER A LENGTH OF 1KM AT 20℃